Budget ❤️ Mon Ster Throttle Potentiometer For The ActiveCare Pilot 2310, Pilot 2410, Prowler 3310, & Prowler 3410 Scooters ⌛

Throttle potentiometer for the ActiveCare Pilot 2310, Pilot 2410, Prowler 3310, and Prowler 3410 scooters. Please check the Compatibilitylist of known compatible models.

Monster Scooter Parts lets you choose the potentiometer as an assembly with the wire harness, lever, and bracket, or you can just buy the pot alone. If you can attach your own wiring, you can save some money!

Note: If you choose the “without harness” option, we strongly recommend soldering the wiring for a proper connection. A patient mechanic with perfect eyesight might be able to thread the wires through the connector loops and crimp them securely, however we discourage this in lieu of proper soldering.

The “with harness” option comes complete with the throttle potentiometer, “wig-wag” lever, bracket, and the pre-attached wiring.

The throttle pot is sometimes called the engager or throttle switch. If your scooter has a faulty throttle potentiometer, it can cause a “jerky” motion while the lever is being pressed, and eventually no forward or backward motion at all. Before your scooter totally stops running due to a bad throttle pot, get a new one from Monster Scooter Parts and keep on scooting.

⚠ WARNING California Residents: Proposition 65 Warning

Potentiometer Specs
Manufacturer: TOCOS
Data coding: RVQ24YS07-01 S25.2S S502
Resistance: 5KΩ (5000) Ohm
Base diameter: 22.95 mm
Shaft unthreaded diameter: 6.40 mm
Overall shaft length (including thread): 25 mm
Thread: M10-1.25