Deals ❤️ Mon Ster Throttle Pot For Go-Go ES (S83/S84), Elite Traveller (SC40E/SC44E), Endurance Li (S54LXLIT), Jazzy Zero Turn, Pride Victory ES 9 (S93), & Victory 10 (S104) 🎉

Unlike most Pride throttle pots, this throttle pot assembly for the ES (S83/S84), Elite Traveller (SC40E/SC44E), Jazzy Zero Turn, Pride Victory ES 9 (S93), and Victory 10 (S104) mobility scooters uses the short 5 mm “stumpy” shaft. In addition to these Go-Go and Pride models, this potentiometer works on the Mega Motion/Windermere Motion Rascal 3, 4, 9, and 10 scooters.

Elite Traveller (SC40E/SC44E) owners please note! The “with harness” potentiometer is serial number specific, and is only applicable to serial number S8019311100FV0 and subsequent for 3-Wheel units and serial number S8119311001FV0 and subsequent for 4-Wheel units. If your Elite Traveller precedes this range, then you will want to order “with harness version of our Throttle Pot Assembly for the Go-Go Elite Traveller (SC40E/SC44E) and Go-Go Ultra X (SC40X/SC44X). The “without harness” versions are the same.

Monster Scooter Parts lets you choose the potentiometer as an assembly with the wire harness, bracket, and black plastic connector as shown in the photo above, or you can just buy the pot alone. If you can attach your own wiring, you can save some money!

Note: If you choose the “without harness” option, we strongly recommend soldering the wiring for a proper connection. A patient mechanic with perfect eyesight might be able to thread the wires through the connector loops and crimp them securely, however we discourage this in lieu of proper soldering.

In addition, the “without harness” option may come with a off-size bracket still attached. This can be easily removed and replaced with the metal bracket from your old throttle pot assembly.

⚠ WARNING California Residents: Proposition 65 Warning

Data coding: 576 S0067 092220
Resistance: 5KΩ (5000) Ohm
Base diameter: 20 mm