Budget ⌛ Mon Ster Throttle Pot Assembly For The Go-Go Elite Traveller (SC40E/SC44E) And Go-Go Ultra X (SC40X/SC44X) ⌛

This throttle pot assembly for the Go-Go Elite Traveller (SC40E/SC44E), Go-Go Ultra X (SC40X/SC44X), and Pride Travel Pro (S36) travel mobility scooters replaces the earlier ELEASMB4829 pots which are no longer available. Unlike most Pride throttle pots, this one uses the short 5 mm “stumpy” shaft.

Monster Scooter Parts lets you choose the potentiometer as an assembly with the wire harness, bracket, and black plastic connector as shown in the photo above, or you can just buy the pot alone. If you can attach your own wiring, you can save some money!

Note: If you choose the “without harness” option, we strongly recommend soldering the wiring for a proper connection. A patient mechanic with perfect eyesight might be able to thread the wires through the connector loops and crimp them securely, however we discourage this in lieu of proper soldering.

In addition, the “without harness” option may come with a off-size bracket still attached. This can be easily removed and replaced with the metal bracket from your old throttle pot assembly.

⚠ WARNING California Residents: Proposition 65 Warning

Data coding: 576 S0067 092220
Resistance: 5KΩ (5000) Ohm
Base diameter: 20 mm